200-310 Premium Bundle

200-310 Premium Bundle

Designing for Cisco Internetwork Solutions Certification Exam

4.5 
(34215 ratings)
0 QuestionsPractice Tests
0 PDFPrint version
April 18, 2024Last update

Cisco 200-310 Free Practice Questions

Q1. What type of device can be installed to increase a broadcast domain? 

A. router 

B. switch 

C. IDS 

D. IPS 

Answer:

Q2. When designing using the Cisco Enterprise Architecture, in which Enterprise Campus layer does the Remote Access and VPN module establish its connection? 

A. Building Access 

B. Campus Core 

C. Enterprise Branch 

D. Enterprise Data Center 

Answer:

Q3. In which phase of PPDIOO are the network requirements identified? 

A. Design 

B. Plan 

C. Prepare 

D. Implement 

E. Operate 

F. Optimize 

Answer:

Explanation: 

Plan Phase 

The Plan phase identifies the network requirements based on goals, facilities, and user needs. This phase characterizes sites and assesses the network, performs a gap analysis against best-practice architectures, and looks at the operational environment. A project plan is developed to manage the tasks, responsible parties, milestones, and resources to do the design and implementation. The project plan aligns with the scope, cost, and resource parameters established with the original business requirements. This project plan is followed (and updated) during all phases of the cycle. 

Q4. Which three describe challenges that are faced when deploying an environment for teleworkers? (Choose three.) 

A. supporting a mix of technically knowledgeable and nontechnical users 

B. simplifying router installation and configuration 

C. verifying available power at employee's house for necessary equipment 

D. avoiding situations where employees might use nonstandard hardware or configurations 

E. reducing daily commuting time to main office location 

F. providing access to FTP servers located in main office location 

G. implementing leased line connectivity between main office and employee's home location 

Answer: A,B,D 

Q5. Which two mechanisms are used by distance vector protocols to prevent routing loops? (Choose two.) 

A. split horizon 

B. route summarization 

C. route poisoning 

D. tuned timers 

Answer: A,C 

Q6. Which Cisco Wireless LAN Controller interface is used for out-of-band management? 

A. service port 

B. management port 

C. controller port 

D. virtual port 

Answer:

Q7. In the enterprise data center, which are the three main components? (Choose three.) 

A. Network Infrastructure 

B. Interactive services 

C. Data Center Management 

D. Internet services 

E. WAN services 

F. VPN and remote access 

Answer: A,B,C 

Q8. Which model of ISR is utilized for the teleworker design profile? A. Cisco 1900 Series 

B. Cisco 1800 Series 

C. Cisco 800 Series 

D. Cisco 500 Series 

Answer:

Q9. When designing a WAN backup for voice and video applications, what three types of connections should be used? (Choose three.) 

A. Private WAN 

B. internet 

C. ISDN 

D. MPLS 

E. dial-up 

F. ATM 

G. DSL 

Answer: A,C,D 

Q10. You are asked to design a new branch office that will need to support 25 users. These users will be using an ISP connection and will need to connect to the main office for network services..Which two Cisco devices are the most appropriate to fulfill all of these requirements? (Choose two.) 

A. Cisco IPS 

B. Cisco ISR G2 

C. Cisco ASA 

D. Cisco 2960 

E. Cisco CRS-1 

F. Cisco ACS 

Answer: B,C 

Q11. DRAG DROP 

Answer:  

Q12. Refer to the exhibit. 

Which statement accurately represents the characteristics of the core layer in this design? 

A. QoS should only be performed only in the core. 

B. Load balancing should never be implemented or used. 

C. Access lists should be used in the core to perform packet manipulation. 

D. Partial mesh should be used as long as it is connected to each device by multiple paths. 

E. Policy-based traffic control should be implemented to enable prioritization and ensure the best performance for all time-critical applications. 

Answer:

Q13. At which layer of the network is route summarization recommended? 

A. data link layer 

B. core layer 

C. distribution layer 

D. access layer 

Answer:

Q14. Which of the following is a component within the Cisco Enterprise Campus module? 

A. Teleworker 

B. E-Commerce 

C. Internet Connectivity 

D. Building Distribution 

E. WAN/MAN Site-to-Site VPN 

Answer:

Q15. Which three of these are layers in the Cisco SONA Architecture? (Choose three.) 

A. Applications 

B. Physical Infrastructure 

C. Presentation 

D. Integrated Transport 

E. Core Common Services 

F. Networked Infrastructure 

Answer: A,B,E 

Q16. Which three items pertain to EIGRP? (Choose three.) 

A. Can use multiple unequal paths. 

B. Routes are redistributed as type 2 by default. 

C. ASN and K values must match to form neighbors. 

D. Uses multicast address 224.0.0.9 for updates. 

E. Exchanges full routing table every 30 seconds. 

F. Summary routes have AD of 90. 

G. External routes have AD of 170. 

Answer: A,C,G 

START 200-310 EXAM