VMware 2V0-41.19 Free Practice Questions

NEW QUESTION 1
A customer is preparing to deploy VMware Kubernetes on an NSX-T Data Center. What is the minimum MTU size for the UPLINK profile?

• A. 1600
• B. 1650
• C. 1550
• D. 1500

Answer: A

NEW QUESTION 2

A NSX-T Data Center administrator wants to ensure that any machine on a public network can communicate with a Web VM running in a NSX-T Data Center environment.
Which NAT type must be created on the Tier-0 or Tier-1 Gateway to achieve this?

• A. 1:1 NAT
• B. Reverse NAT
• C. DNAT
• D. SNAT

Answer: B

NEW QUESTION 3
An NSX administrator has observed connectivity issues between the NSX Manager and the KVM Transport Node.
Which two log files could be used to troubleshoot the issue on the KVM Transport Node? (Choose two.)

• A. /var/log/vmware/nsx-syslog
• B. /usr/vmware/log/syslog
• C. /var/log/nsx/syslog
• D. /usr/vmware/nsx-syslog
• E. /var/log/syslog

Answer: AE

NEW QUESTION 4
Which statement Is true regarding the audit user account? (Choose two.)

• A. The admin user must set the password for the audit account to log in to NSX Manager.
• B. The administrator must run the set audit user password <password> command.
• C. The audit user has read-write access to the NSX Manager.
• D. The audit user is disabled by default and must be enabled to log in to the NSX Manager.
• E. The administrator must run the set user audit password <password> command.

Answer: AC

NEW QUESTION 5
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?

• A. get host-switch <Host-Switch-Name> tunnels
• B. get host-switch <Host-Switch-Name> tunnel status
• C. get transport-node tunnel state
• D. get transport-node tunnel status

Answer: A

NEW QUESTION 6
How is the intra-tier transit link connection created between SR and DR for a Tier-0 Gateway?

• A. Manually create a gateway interface and mark it as transit.
• B. Automatically created when DR is created.
• C. Automatically created when SR is initialized.
• D. Manually create external uplink interface and mark it as transit.

Answer: C

NEW QUESTION 7
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX Manager Simplified UI shows the mapping between the virtual NIC and the host's physical adapter?

• A. N-VDS Visualization
• B. Activity Monitoring
• C. IPFIX
• D. Port Mirroring

Answer: A

NEW QUESTION 8
What is VMware's recommendation for the minimum MTU requirements when planning a NSX-T Data Center deployment?

• A. MTU should be set to 1550 or less across the data center network including inter-data center connections.
• B. MTU should be set to 1500 or less only on inter-data center connections.
• C. Configure Path MTU Discovery and rely on fragmentation.
• D. MTU should be set to 1600 or greater across the data center network including inter-data center connections.

Answer: D

NEW QUESTION 9
A customer is planning deployment of a third-party OpenStack application. Which is used to grant permissions to the application on NSX Manager?

• A. Guest Identity
• B. Cloud Identity
• C. Principal Identity
• D. API Identity

Answer: D

NEW QUESTION 10
An NSX administrator created a Segment from the Simplified UI and wants to find the Replication Mode configured on the Segment. Which NSX CLI command lists the Replication mode?

• A. get logical-switches
• B. get logical-switch <Logical-switch-UUID>
• C. get logical-switch <Local-Switch-UUID> status
• D. get logical-switch status

Answer: B

NEW QUESTION 11
When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?

• A. SR and DR doesn't need to be connected to provide any stateful services.
• B. SR is instantiated and automatically connected with DR.
• C. SR and DR is instantiated but requires manual connection.
• D. DR is instantiated and automatically connected with SR.

Answer: B

NEW QUESTION 12
What is the most restrictive NSX-T built-in role which allow a user to apply configuration changes on a NSX Edge?

• A. Network Operator
• B. Network Engineer
• C. Cloud Service Administrator
• D. NSX Administrator

Answer: B

NEW QUESTION 13
Which two commands could be used on an ESXI transport node to validate connectivity to the NSX Manager? (Choose two.)

• A. nsxcli --cmd get manager status
• B. esxcli network ip connection list I grep rabbitmq
• C. nsxcli --cmd get managers
• D. nsxcli --cmd get manager connectivity status
• E. esxcli network ip connection list I grep 5671

Answer: BE

NEW QUESTION 14
An NSX administrator is reviewing syslog and notices that Distributed Firewall Rules hit counts are not being logged.
What could cause this issue?

• A. Syslog Is not configured on the NSX Manager
• B. Distributed Firewall Rule Logging is not enabled
• C. Zero Trust Security Is not enabled
• D. Syslog is not configured on the ESXI transport node

Answer: C

NEW QUESTION 15
An NSX administrator Is planning to deploy a multi-tier routing topology in their NSX-T Data Center environment to provide north-south connectivity for the VMs.
Which routing component must be deployed?

• A. Tier-0 Gateway
• B. Edge Node
• C. Tier-1 Gateway
• D. Edge Cluster

Answer: A

NEW QUESTION 16
What are the supported N-VDS modes?

• A. DPDK Datapath
• B. Enhanced Datapath
• C. Overlay Datapath
• D. Standard Datapath
• E. Secure Datapath

Answer: BD

NEW QUESTION 17
In a NSX-T Data Center environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)

• A. Configure a Tier-1 gateway and connect it directly to the physical routers.
• B. Configure ECMP on the Tier-0 gateway.
• C. Configure NAT on the Tier-0 gateway.
• D. Deploy Large size Edge node/s.
• E. Add an additional vNIC to the NSX Edge node.

Answer: BD

NEW QUESTION 18
Refer to the exhibit.

An administrator Is trying to configure a medium load balancer in a production environment, but is getting the error message shown in the exhibit.
Which step must the administrator perform to remediate the problem?

• A. Reduce the size of the virtual pool.
• B. Restart the NSX Manager.
• C. Power-off the existing load balancer and change its size.
• D. Place the Tier-1 Gateway in a large edge cluster and redeploy the load balancer.

Answer: D

NEW QUESTION 19
Which two statements describe the characteristics of the Services Router (SR) component of a Tier-0 Gateway? (Choose two.)

• A. Edge cluster is mandatory for SR to be created.
• B. SR can exist on both hypervisor transport nodes and Edge transport nodes.
• C. SR is automatically created when stateful services are enabled.
• D. Edge transport nodes are required for SR to be created.
• E. SR can be created from the NSX Advanced Networking & Security tab in the UI.

Answer: AE

NEW QUESTION 20
Which command on ESXi Is used to verify the Local Control Plane connectivity with Central Control Plane?

• A. esxcli network ip connection list | grep ccpd
• B. esxcli network ip connection list | grep 1234
• C. esxcli network ip connection list | grep netcpa
• D. esxcli network ip connection list | grep 1235

Answer: D

NEW QUESTION 21
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?

• A. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
• B. Automatically created when Tier-1 is created.
• C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
• D. Automatically created when Tier-1 is connected with Tier-0 from Simplified UI.

Answer: D

NEW QUESTION 22
......