300-085 Premium Bundle

300-085 Premium Bundle

Implementing Cisco Collaboration Applications Certification Exam

4.5 
(15990 ratings)
0 QuestionsPractice Tests
0 PDFPrint version
March 28, 2024Last update

Cisco 300-085 Free Practice Questions

Q1. Which contact photo retrieval method is supported when using UDS as the directory for Jabber? 

A. photo URI, with pictures hosted on a web server 

B. binary object retrieval of the user's jpegPhoto attribute 

C. None, contact photos are not supported with UDS. 

D. binary object retrieval of the user's thumbnailPhoto attribute 

Answer:

Q2. In Cisco Unified Communications Manager presence with SIP, if the presence entity resides within the Cisco Unified Communications Manager cluster, how does Cisco Unified Communications Manager respond to a SIP line-side presence request? 

A. by sending a SIP NOTIFY message to the presence watcher to indicate the current status of the presence entity 

B. by sending a SIP SUBSCRIBE message to the presence watcher to request the presence status of the indicated presence entity 

C. by sending SCCP messages to the presence watcher to indicate the current status of the presence entity 

D. by using the Cisco Unified Presence PUBLISH Trunk service parameter on Cisco Unified Communications Manager to associate the user with a line appearance 

Answer:

Q3. When troubleshooting an MWI issue in Cisco Unity Connection, which task should you perform in the phone system component at the beginning of troubleshooting? 

A. Ensure that MWI is enabled for the user. 

B. Ensure that the user has the correct phone system assigned. 

C. Run the Check Telephony Integration test. 

D. Ensure that the ports are configured for MWI only. 

E. Ensure that the pilot number matches the Cisco Unified Communications Manager configured pilot number. 

Answer:

Q4. Which three functionalities can be performed by Cisco TMS? (Choose three.) 

A. create conferences 

B. provide routing for the video media streams 

C. integrate with Cisco Unified Communications Manager through a SIP trunk 

D. monitor the system status of video endpoints and their logs 

E. run reports based on endpoint utilization 

F. perform bandwidth management for endpoints based on inter and intra location settings 

G. perform call routing decision for destinations that are not registered or local to the VCS 

Answer: A,D,E 

Q5. When configuring a new Cisco Unified Personal Communicator device, which device type should be configured in Cisco Unified Communications Manager when using Cisco Unified Personal Communicator 8.X? 

A. Cisco Unified Personal Communicator 

B. Cisco IP SoftPhone 

C. Cisco IP Communicator 

D. Cisco Unified Client Services Framework 

E. It depends on the IP phone that is associated to the Cisco IP SoftPhone. 

Answer:

Q6. Which three components.are the minimum needed to enable the FindMe feature for the users of an enterprise? (Choose three.) 

A. Cisco TelePresence Management Suite 

B. Cisco TelePresence Management Suite Provisioning Extension 

C. Cisco Unified Communications Manager with Extension Mobility Service 

D. Video Communication Server 

E. Cisco IM and Presence 

F. Cisco Webex On Premises deployment 

G. Cisco TelePresence Conductor 

Answer: A,B,D 

Q7. How are partitions and calling search spaces in Cisco Unity Connection different from partitions and calling search spaces in Cisco Unified Communications Manager? 

A. In Cisco Unity Connection, search spaces do not include partitions. 

B. In Cisco Unity Connection, partitions include calling search spaces. 

C. In Cisco Unity Connection, partitions and calling search spaces are not used. 

D. In Cisco Unity Connection, partitions and calling search spaces function just as they do in Cisco Unified Communications Manager. 

E. In Cisco Unity Connection, only partitions are used. 

Answer:

Q8. From which entity does a Cisco Unified Personal Communicator device receive its TFTP server address when it is integrated with a Cisco Unified Presence Server for failover? 

A. Cisco Unified Presence server 

B. Cisco Unified Communications Manager TFTP server 

C. Device profile in Cisco Unified Communication Manager 

D. Manually created upon installation of Cisco Unified Personal Communicator 

E. Cisco Unified Personal Communicator does not use TFTP. 

Answer:

Q9. Cisco Unified Communications Manager SIP integration with Cisco Unity Connection requires which configuration component to connect to voicemail? 

A. Route Pattern 

B. Hunt Group 

C. Route Group 

D. Hunt Pilot 

E. Trunk Group 

Answer:

Q10. Which two of the following protocols can be used to integrate Cisco Unity Connection with Cisco Unified Communications Manager? (Choose two.) 

A. H.323 

B. SIP 

C. MGCP 

D. SCCP 

E. OSPF 

F. BGP 

Answer: B,D 

Q11. Which three functions are executed using the Cisco TMS? (Choose three.) 

A. endpoint system upgrades 

B. edit call control 

C. manage phone books 

D. provision Jabber Instant Messaging 

E. create voicemail account 

F. create new conference 

Answer: A,C,F 

Q12. Which parameter is used to accommodate the local dial plan in Cisco Unity Connection when the Voice Profile for Internet Mail location is configured? 

A. Remote Phone Prefix 

B. Simple Mail Transfer Protocol Domain Name 

C. IP Address 

D. Display Name 

E. Dial ID 

F. Route Patterns 

Answer:

Q13. An end user is complaining that when they try to retrieve their voicemail messages, they hear the message "mailbox is currently in use." What must the administrator do to resolve this issue? 

A. The administrator must reload the mailbox for the user. 

B. The administrator must verify that the mailbox is enabled. 

C. The administrator must verify that the primary extension that is associated with the end user is in an E.164 format. 

D. The administrator must unlock the mailbox for the user. 

Answer:

Q14. A user has reported that keys pressed when accessing Cisco Unity Express are not being acknowledged by the system. This configuration is found on the voice-enabled IOS router: 

dial-peer voice 6800 voip destination-pattern 5... 

session protocol sipv2 

session target ipv4:10.3.6.127 

codec g711ulaw 

no vad 

Which configuration command is needed to complete the configuration and solve the problem? 

A. dtmf-relay sip-notify 

B. dtmf-relay rtp-nte 

C. dtmf-relay cisco-rtp 

D. dtmf-relay h245-signal 

Answer:

Q15. Which four items are needed to provision a user for Cisco Unified Presence? (Choose four.) 

A. Client Services Framework device 

B. directory number 

C. mobility information 

D. voicemail account 

E. assign user to Cisco Unified Presence node 

F. UC service 

G. service profile 

Answer: A,E,F,G 

Q16. When Cisco TMS provisioning is enabled, which four Cisco TMSPE services are used by the VCS for provisioning and FindMe data? (Choose four.) 

A. server diagnostics 

B. devices 

C. users 

D. PLCM directory service 

E. FindMe 

F. live service 

G. database scanner service 

H. phone books 

Answer: B,C,E,H 

Q17. When configuring mobile and remote access, which three servers.must be added manually to the HTTP server allow list on the Expressway-C or VCS-C? (Choose three.) 

A. Cisco Unity Connection 

B. contact photos web server 

C. Jabber update server 

D. Active Directory domain controller 

E. Outlook Web Access 

F. company intranet 

G. TFTP server 

Answer: A,B,C 

Q18. Where in Cisco Unified Communications Manager is BFCP enabled? 

A. enterprise phone configuration 

B. SIP trunk security profile 

C. SIP profile 

D. common phone profile 

E. common device configuration 

Answer:

START 300-085 EXAM