HP HPE0-J57 Free Practice Questions

NEW QUESTION 1
A Company using an existing 1GB ISCSI storage array is experiencing storage access
performance issue. They are interested in deploying HPE 3PAR Storeserv with 16GB /S FC end to-end to improve the performance to the minimal changes to the environment. The existing environment consists of these HPE products
* HPE C7000 Blade system platinum blade enclosure with HP virtual connect Flex 10 interconnect modules.
* Configuration of HPE Proliant Gen8 and Gen9 blade servers
* HPE 2920 Switches
Which HPE products must be included to support new HPE 3PAR Storeserv?(Select two)

• A. HPE B-Series 16GB SAN switch for HPE Blade system C-class series
• B. HPE 16GB/s Fibre channel HBA for Blade servers
• C. HP 5900CP switch series with 16GB/S SFP+ Modules
• D. HPE Flex fabric 20GB,2-Port 630 FLB adapter
• E. HPE Virtual connect Flex fabric 20/40 f8 modules

Answer: AB

NEW QUESTION 2
You are planning an upgrade to a customer’s existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade.
Which statement is correct about performing this upgrade?

• A. When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers.
• B. The MPIO service will do a failover, and the servers will continue to have access via two paths.
• C. Windows servers require host explorer is installed to ensure MPIO is unaffected.
• D. As long as MEM driver is installed on VMware vSphere, no path failures are seen.

Answer: A

NEW QUESTION 3
A customer asks for an integrated solution for their remote office with All-Flesh storage and ease of management. Application-aware replication to their main office is an important requirement. Which HPE solution component should you discuss with the customer first?

• A. HPE SimpliVity 380
• B. HPE MSA 2052 Storage
• C. HPE Nimble CS1000 system
• D. HPE 3PAR StoreServ 8200

Answer: A

NEW QUESTION 4
A customer wants to implement a management and monitoring tool for an HPE B-series SAN switch environment. You plan to recommend the HPE SAN Network Advisor.
Which information about the customer’s environment will help you to decide which edition to recommend?

• A. FCIP support
• B. Amount of used fabrics
• C. FCoE support
• D. Fabric OS version

Answer: D

NEW QUESTION 5
What is the benefit of HPE Synergy? (Choose two.)

• A. It supports up to three HPE StoreVirtual VSA nodes for storage RAID.
• B. It can compose and reclaim DAS storage.
• C. It supports HPE BladeSystem c-class FlexFabric interconnect modules.
• D. It can use HPE 3PAR File Persona for object storage.
• E. It can prevent block storage services from HPE 3PAR as part of the resource pool.

Answer: BE

NEW QUESTION 6
A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh.
Which switch feature will ensure that the latencies in the backend are at the lowest possible level?

• A. LACP
• B. NPIV
• C. FSPF
• D. VSF

Answer: C

NEW QUESTION 7
A customer with an HPE 3PAR StoreServ needs to upgrade their aging backup solution to a more advanced solution using snapshots and deduplication.
Which HPE products would meet the customer’s needs? (Choose two.)

• A. HPE 3PAR File Persona
• B. HPE StoreEver
• C. HPE 3PAR Remote Copy
• D. HPE StoreOnce
• E. HPE Recovery Manager Central

Answer: CD

NEW QUESTION 8
A customer currently has a CS1000H and wants to upgrade to a CS3000. What must be considered before upgrading?

• A. This upgrade is disruptive and needs planned downtime.
• B. A capacity upgrade to a fully populated array has to be performed first.
• C. Timeless storage support is not offered for CS1000H entry-level systems.
• D. A controller upgrade to a CS1000F has to be performed first.

Answer: B

NEW QUESTION 9
A customer has a new Nimble CS3000 21T storage systems and is facing latency issues for his 2TB ERP database. What would be a design approach to solve this issue ?

• A. Perform controller upgrade to a Nimbel CS3000 storage systems
• B. Add additional SSd drives as cache to the system and PIN the volume
• C. Enable storage tiering on the system and map the volume to the new tier
• D. Change RAID of the drives to RAID -1and setup quality of services for the volume

Answer: B

NEW QUESTION 10
A customer needs to upgrade their HPE storage environment, including driver and firmware levels and OS, to the latest version.
Where can you find the needed information about supported versions?

• A. HPE Storage Assessment Foundry
• B. HPE SAN Design Reference Guide
• C. HPE OneView
• D. HPE SPOCK

Answer: D

NEW QUESTION 11
A customer migrate their infrastructure from a 3rd party storage to a Nimble environment. During an architecture workshop, you discuss VMvision with the customer and the system engineer. Which statement is correct when implementing performance monitoring using VMVision?

• A. Nibmle service processor collects relevant per VM performance data and send them using SSL port 443 to VMvision
• B. VMvision is an agentless integration into infosight and needs only the Vcenter server appliance credentials to connec
• C. (page 112)
• D. VMware vSphere storage API’s array integration (VAAI)has to be configured to combine storage and VM performance metrics
• E. SNMP trap service has to be configured to send traps to infosight and integrate performance data using VMvision.

Answer: C

NEW QUESTION 12
During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)

• A. Loss of persistent cache
• B. B-series SAN switch upgrades
• C. Firmware upgrade
• D. Node maintenance or failure
• E. Loss of full-mesh cluster interconnect

Answer: CD

NEW QUESTION 13
Users are complaining about poor performance with their Data Warehouse application. What is an effective solution to increase their performance at minimal cost?

• A. HPE 3PAR Adaptive Flash Cache
• B. HPE 3PAR Priority Optimization
• C. HPE 3PAR Dynamic Optimization
• D. HPE 3PAR Adaptive Optimization

Answer: B

NEW QUESTION 14
A customer needs to expand an HPE StoreVirtual VSA based cluster with two additional VSA instances. What do you need to consider when designing the new VSA instances?

• A. They will require downtime to re-balance the resources within the cluster.
• B. They must be configured into a new management group.
• C. They must be of equal or greater capacity than the existing instances in a cluster.
• D. They can only have equal to or smaller capacity compared to the existing instances.

Answer: C

NEW QUESTION 15
What is used to migrate data between nodes in an HPE StoreVirtual VSA environment?

• A. Network RAID
• B. Peer Motion
• C. SmartClone
• D. Remote Copy

Answer: B

NEW QUESTION 16
You are adding a new host for an HPE 3PAR StoreServ proof-of-concept .In addition to the host name ,What is the minimum information that is required to create a host profile?

• A. Host Persona
• B. Host MAC
• C. Host set
• D. Host WWN

Answer: D

NEW QUESTION 17
What advantage does the Unified API that is part of HPE’s composable strategy provide?

• A. infrastructure lifecycle managed with standard programming code
• B. single portal for managing servers, networking, and storage
• C. write-back capability and instant cable warmth
• D. dedicated object storage platform

Answer: B

NEW QUESTION 18
What owns the physical drives in an HPE 3PAR StoreServ Express Layout?

• A. a logical disk
• B. a chunklet
• C. a single node
• D. a node pair

Answer: D

NEW QUESTION 19
An HPE 3PAR StoreServ 9000 All-Flash Array customer plans to deploy a secondary array 20 km away from their primary array to enable storage replication over a dark fibre. Their existing environment consists of one HPE Synergy Frame 12000, HPE SN6000B Fibre Channel Switches, HPE FlexFabric 5700 Switch Series, and HPE StoreOnce Systems.
Which HPE license is required to meet the customer’s technical requirements?

• A. Intelligent Resilient Framework licenses
• B. HPE StoreOnce Replication
• C. Extended Fabric
• D. HPE 3PAR Remote Copy

Answer: D

NEW QUESTION 20
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?

• A. Persistent Memory
• B. Persistent port (96)
• C. Peer persistenceD Persistent Cache

Answer: B

NEW QUESTION 21
......